MATERIAL SAFETY DATA SHEET

 

 

Section 1 - Material Identity

 

Product Name:        WASH & WAX

 

Product Use:           Cleaning Compound

 

 

Manufacturer’s Supplier’s Name & Address

 

Telephone Number – (714) 742-6792

 

Hot Wax Distributors

P.O. Box 1008

Stanton, CA  90680

 

 

 

Days:      (310) 515-9530

 

Nights:    CHEMTREC: 800/424-9300

 

DOT Proper Shipping Name: CLEANING COMPOUND, NOI

 

EPA Hazardous Waste Class:                N/A

 

DOT Shipping ID Number:                                    N/A

 

 

 

 

Section 2 - Physical & Chemical Characteristics

 

Vapor Density (air=1):             Negligible

 

Solubility in Water by Weight:

 

Boiling Point:                          > 212-F   

 

Appearance and Odor:              A viscous BLUE colored liquid with NO odor.

 

Specific Gravity:      Heavier than water

 

pH:                                          7-8

 

Vapor Pressure at 20°C:           n/a

 

Percent Volatile by Volume:     <100%

 

Evap. Rate:              n/a                             

 

 

Section 3 -Ingredients & Specifications

 

Materials       

 

        %

 

           TLV

 

            Hazard

 

       CAS Number

 

ISOPROPYL ALCOHOL

 

 

       <2

 

        400 PPM

 

         FLAMMABLE

 

          67-63-0

 

quaternary

 

 

 

          N/A

 

N/A

 

N/A

 

 

 

4 - Fire & Explosion Hazard Data

 

Flash Point & Method:            Noncombustible

 

Flammable Limits in Air % by volume:                                                    Lower: Noncombustible            Upper: Noncombustible

 

Extinguishing Media:                                                Use appropriate extinguishing media for surrounding fire.

 

Special Fire Fighting Procedures:              Fire fighters should wear protective equipment for surrounding fire.  Water spray may be used to cool fire-exposed containers, to disperse vapors, protect personnel, and to dilute and flush spills away from fire.

 

Unusual Hazards:      This material is not combustible and does not support combustion.

 

 

Section 5 - Health Hazard Data

 

 

 

 

 

Effects of Acute Exposure:  This undiluted material is severely irritating to the eyes and mucous membranes and a skin irritant.  It may cause alkaline eye burns.

 

a) Skin Contact:       Material is a skin irritant.  Prolonged or repeated contact may cause redness, burning, swelling and dermatitis.

 

b) Eye Contact:        Direct contact or exposure to mists may cause burning, tearing, redness, swelling, corneal burns and eye damage.

 

c) Ingestion:             Accidentally swallowing this material may cause severe irritation of the mouth, throat, esophagus and stomach.

 

d) Skin Absorption:                  N/A         

 

e) Inhalation:           Exposure to the undiluted material is unlikely.  Exposure to mists from the diluted material may cause irritation of the nose and throat.

 

Chronic Effects of Overexposure:

 

None known.

 

Other Health Hazards:

 

N/A

 

Emergency and First Aid Procedures: If victim is not breathing or if breathing difficulties develop artificial respiration or oxygen should be administered by qualified personnel.

 

a) Skin:    Remove contaminated clothing and flush contact area with water.  If redness or irritation develops and persists, seek medical assistance.

 

b) Eyes:   Immediately flush affective eye(s) with water for at least 15 minutes, washing under the eyelids.  Seek medical assistance.

 

c) Swallowing:          If victim is conscious and alert, give milk or water to drink.  See medical assistance.

 

d) Inhalation:           Move away from source of exposure to mists.  If irritation develops and persists, seek medical assistance.

 

e) Comments/Physician Information:      This alkaline material is severely irritating to the eyes and mucous membranes, but has no known systemic toxicity.

 

 

Carcinogen Evaluation

 

.

 

 

Section 6 - Reactivity Data

 

Stability -

 

Stable under normal conditions of storage and handling.

 

Conditions to Avoid for Stability

 

May react with strong oxidizing agents.

 

Incompatibility (Materials to Avoid) -

 

Strong oxidizing agents

 

Hazardous Polymerization -

 

Will not occur

 

Hazardous Decomposition/Byproducts

 

None known

 

 

Section 7 - Spill or Leak Procedures

 

                      Release/Spill

                       Procedures

                              

 

Steps to be Taken:   Provide adequate ventilation.  Wear recommended protective clothing and equipment.  Dike large spills and use water to flush to a holding area for later disposal.  Pick up small spills or residue for disposal.

 

Waste Disposal Method:          Dispose of in accordance with federal, state and local regulations.  This material is not classified by EPA as a hazardous waste.

 

 

Section 8 - Special Protection Information

 

 

 

Eyes:        Chemical goggles are recommended to prevent eye contact.

 

                       Protective

                       Equipment

 

Respirator:               None normally required.

 

                              

 

Gloves:                     Protective gloves are recommended when prolonged skin contact with the undiluted material may occur.  

 

 

 

Other:      An eye wash and a source of running water should be available to wash or flush the eyes and skin.

 

 

                       Ventilation

 

General Mechanical:                                 General mechanical or dilution ventilation in situations when misting may occur.

 

 

 

Other:

 

 

Section 9 - Special Precautions

 

 

                       Handling &

                          Storage

 

General:   Store in closed containers in a cool, dry, well-ventilated area.  Protect containers from physical damage.  Use in well ventilated area.

 

 

 

Other:     Wear recommended protective equipment and clothing.  Avoid eye contact, prolonged skin contact and breathing mists.  Wash thoroughly after handling.

 

Hazards During Non-Routine Operations

 

None.

 

Special Precautions and Comments

 

Avoid conditions where misting or splashing may occur.  Empty containers retain material residue.  Keep containers closed and do not use to mix or store any other materials.

 

Medical Conditions Aggravated by Exposure

 

Pre-existing skin disease.  Chronic pulmonary disease.

 

Section 10- Other Information

 

The information contained herein is based on data considered accurate.  However, the information is provided without any warranty, expressed or implied, regarding its correctness.  The conditions or methods of handling, storage, use and disposal of the product are beyond our control and may be beyond our knowledge.  For this and other reasons, we do not assume responsibility for personal injury or property damage to vendees, users or third parties caused by the material.  We also do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product.

 

 Prepared By:  Jet Shine Wax Products, Inc.

 New/Revision Date: 09/17/2009